Find an independently inspected and professionally vetted Master Builder you can trust using our online search.

Loft conversions can be the ideal way to add space to a house without extending its footprint. Whether it is a growing family, a new hobby or the need for a dedicated home office space, a loft conversion is often the perfect solution for those wanting to squeeze the most space out of their existing homes. Our guide to converting a loft includes advice on everything from costs and planning permission to the best design ideas for your project.

Loft conversions are a particularly useful solution where planning permission for an extension is likely to be difficult, or in built-up urban areas where there simply isn’t the external space. It is also worth bearing in mind that, according to Nationwide, an additional bedroom and bathroom has the potential to add around 20% to the value of a typical three-bedroom, one-bathroom house.

Some lofts are more suitable for conversion than others. Tricky loft conversions can be costly and disruptive so it is important to ensure the finished product is a useful space and/or adds the value you hoped to achieve. Factors that determine whether or not your loft can be converted include:

Head height needs to be measured from the top of the floor joists in the loft, to the underside of the ridge beam. Although the building regulations permit head heights of 2.2m, a far more comfortable height once a new floor covering has been laid and the ceiling finish has been applied is 2.4m.

Generally, the steeper your roof pitch, the easier the loft conversion will be, with most angles above 30 degrees working best. And the steeper the roof pitch, the more head height will be available (see above).

There are two main types of roof structure: a cut roof, or trussed. A quick peek in your loft will reveal which you have, with the majority of houses built before the 1960s having cut roofs. Those built from the late 1960s onwards usually have trussed roofs.

A cut roof uses rafters, joists and purlins and leaves the majority of the triangular space below free. A trussed roof uses W-shaped trusses (or supports) that provide a braced support and run through the cross section of the loft — effectively blocking some of the void that you will need in order to create a usable space. Both are convertible but will require different approaches.

Work with a structural engineer and qualified builder to ensure that the opposing roof slopes in a trussed roof are fully supported and tied together at the base (usually done with new floor joists) as well as close to the apex with new collars. Sometimes, steel beams are placed between load bearing walls for the new floor joists to hang on and the rafter section to be supported on — along with a steel beam at the ridge. This new structure must be put in place before any of the old trusses are cut.

You might also find that the rafters may require strengthening — this is often undertaken by doubling them up with new ones fixed alongside, or by using sheets of oriented strand board to act as a windbrace.

If your water tank is located in the loft you will need to find a new spot for it.  Alternatively, you may wish to consider getting rid of the tank entirely, opting for a mains-fed combination boiler or pressurised unvented hot water cylinder instead. This can be located elsewhere in the house (such as in an airing cupboard).

If there is a chimney stack in your loft then you may wish to remove it to make more space. It is vital that you consult a structural engineer and employ the services of a good builder in this case. While this is undoubtedly a job that will add to costs and timescales, it won’t prevent you from converting your loft. If you adjoin a neighbour, check how this may affect their structure and complete any party wall requirements.

Even if you have the required amount of headspace available in your loft, you may run into difficulties if you don’t have enough space for a staircase up to it. The building regulations require a minimum of 1.9m of headroom at the centre of the flight, and 1.8m at the edges (where there will be sloping roofs). You will also need to allow space for the staircase on the floor below.

There are many variations which will affect cost, timescale and the amount of work involved.

Consulting a good builder, loft specialist, architect or design and build company should be one of the first things you do in order to work out the costs and viability of the project.

There are five main loft conversion types that tend to be used in the UK. The loft conversion type you opt for should depend on your existing roof structure and shape, how much you want to spend and will, on some occasions, be dictated by planning restrictions. Your builder, house designer or chosen loft conversion specialist will be able to advise you further.

A flat roof dormer loft conversion is a popular choice for many people, being one of the simpler and more cost effective types of loft conversion out there. A dormer loft conversion projects out vertically from the sloping section of the roof and uses standard windows — as opposed to rooflights. They can span the entire width of the roof, or simply feature a couple of smaller dormer windows spaced at regular intervals. This is a great way to add headroom, with its box-like structure creating an easy-to-use space with flat ceilings and walls. While not always aesthetically pleasing compared to other types of conversion, they can fall under permitted development. A gabled dormer, where the roof has a pitched roof as opposed to flat, is more visually appealing but might be a little more expensive and limit internal headroom. Project and photo by Master Builder York Builder Ltd.

A flat roof dormer loft conversion is a popular choice for many people, being one of the simpler and more cost effective types of loft conversion out there.

A dormer loft conversion projects out vertically from the sloping section of the roof and uses standard windows — as opposed to rooflights. They can span the entire width of the roof, or simply feature a couple of smaller dormer windows spaced at regular intervals. This is a great way to add headroom, with its box-like structure creating an easy-to-use space with flat ceilings and walls.

While not always aesthetically pleasing compared to other types of conversion, they can fall under permitted development.

A gabled dormer, where the roof has a pitched roof as opposed to flat, is more visually appealing but might be a little more expensive and limit internal headroom.

Project and photo by Master Builder York Builder Ltd.

A mansard loft conversion is almost like adding an entire new storey to a house and is ideal for period properties and for loft conversions on terraced houses. Bear in mind that the party wall between houses will usually need to be raised and suitable agreements required. A mansard loft conversion involves altering the roof structure of a sloped roof, giving it an almost vertical wall – usually 72 degrees. The roof remains flat and windows are inserted into the new roof structure. Most mansard conversions span gable wall to gable wall. Mansard loft conversions are most commonly added to the rear of houses, but they can be added to the side and front too. Double mansard roofs are also possible, where they are added to both the front and rear of the house. Those after loft conversions with en-suites or attic conversions should consider this style of conversion. A mansard loft conversion is usually more expensive than other types of loft conversion, taking more time and, in the majority of cases, requiring planning permission. Project and photo by Master Builder Ash Island Lofts Ltd.

A mansard loft conversion is almost like adding an entire new storey to a house and is ideal for period properties and for loft conversions on terraced houses. Bear in mind that the party wall between houses will usually need to be raised and suitable agreements required.

A mansard loft conversion involves altering the roof structure of a sloped roof, giving it an almost vertical wall – usually 72 degrees. The roof remains flat and windows are inserted into the new roof structure. Most mansard conversions span gable wall to gable wall.

Mansard loft conversions are most commonly added to the rear of houses, but they can be added to the side and front too. Double mansard roofs are also possible, where they are added to both the front and rear of the house.

Those after loft conversions with en-suites or attic conversions should consider this style of conversion. A mansard loft conversion is usually more expensive than other types of loft conversion, taking more time and, in the majority of cases, requiring planning permission.

Project and photo by Master Builder Ash Island Lofts Ltd.

A roof light loft conversion will almost certainly be the cheapest way to convert a loft. The existing space remains just as it is, with roof windows added. The floor will need to be reinforced and stairs added. Electrics, plumbing and insulation will also be required for the space to become habitable. Roof lights are an easy way to draw in natural light and provide ventilation, with relatively minimal disruption to your existing living space. The frame of the roof lights will be fitted into a new opening in the roof, before flashings are added and the tiling made good around the new window. This is a good option for small loft conversions or simple loft bedrooms — although remember that a minimum of 2.25m of head height in the centre of the room will be required in order to properly build up the floor. It may also be necessary for the new loft stairs to come into the centre of the room due to limited headroom. In most cases, a roof light loft conversion won’t require planning permission (although it may if the roof lights will be at the front of the house).  

A roof light loft conversion will almost certainly be the cheapest way to convert a loft. The existing space remains just as it is, with roof windows added. The floor will need to be reinforced and stairs added. Electrics, plumbing and insulation will also be required for the space to become habitable.

Roof lights are an easy way to draw in natural light and provide ventilation, with relatively minimal disruption to your existing living space.

The frame of the roof lights will be fitted into a new opening in the roof, before flashings are added and the tiling made good around the new window.

This is a good option for small loft conversions or simple loft bedrooms — although remember that a minimum of 2.25m of head height in the centre of the room will be required in order to properly build up the floor. It may also be necessary for the new loft stairs to come into the centre of the room due to limited headroom.

In most cases, a roof light loft conversion won’t require planning permission (although it may if the roof lights will be at the front of the house).

Those looking for ideas for loft conversions for bungalows, or for a semi-detached house, could consider a hip to gable loft conversion. In layman terms, a hip to gable loft conversion straightens the slanted (hipped) end of a roof in order to create a vertical wall (the gable end). The existing roof is taken back and the end wall built up to form the new gable with a standard pitched roof. This creates a good space internally with full headroom. The creation of this new vertical wall means standard window openings can be added for natural light.    

Those looking for ideas for loft conversions for bungalows, or for a semi-detached house, could consider a hip to gable loft conversion. In layman terms, a hip to gable loft conversion straightens the slanted (hipped) end of a roof in order to create a vertical wall (the gable end).

The existing roof is taken back and the end wall built up to form the new gable with a standard pitched roof. This creates a good space internally with full headroom.

The creation of this new vertical wall means standard window openings can be added for natural light.

Ready-made loft conversions, often made up using a steel frame, are fabricated off-site before being craned into position — after the roof of the house has been taken off. Many modular loft companies can organise planning permission approval on your behalf. This type of loft conversion is quick and requires little in the way of on-site labour – you can even choose packages which include doors, windows, electrics and bathrooms. Some modular lofts come complete with a Building Regulations certificate and a Part P Electrical certificate too. Accurate measurements and planning will be required to ensure a good fit and smooth installation.

Ready-made loft conversions, often made up using a steel frame, are fabricated off-site before being craned into position — after the roof of the house has been taken off. Many modular loft companies can organise planning permission approval on your behalf.

This type of loft conversion is quick and requires little in the way of on-site labour – you can even choose packages which include doors, windows, electrics and bathrooms. Some modular lofts come complete with a Building Regulations certificate and a Part P Electrical certificate too. Accurate measurements and planning will be required to ensure a good fit and smooth installation.

If you want a bedroom loft conversion then you may well be considering installing an ensuite or bathroom in your loft too.

Naturally this will add to costs, disruption levels and timescales, and you will certainly need an experienced builder and plumber to carry out the work for you to the required building regulation standards. Tell your builder early on if you are thinking about a bathroom loft conversion. The main issues with bathroom loft conversions are:

Check with your builder and structural engineer that the bathroom floor is constructed to deal with flooding, damp conditions, and leaks. A marine grade plywood will be required, along with a waterproof tile backing board on the walls.

Be sure to find a builder who can advise you on all aspects of your loft conversion. Base your decision on the rapport you have with the builder, their experience in the type of project you are carrying out, and the opinions of their previous clients. Also check for valid insurance to the level of cover required.

To find a builder for your loft conversion, use our Find a Builder tool. FMB members are experts in their field: professionals who have been thoroughly vetted and independently inspected on joining to ensure they meet the high quality standards. 

Aim to get at least three quotes before choosing your builder — and remember that cheapest is not always best. See our guide for tips on making the right choice for your project.

If you live in a listed building you will require Listed Building Consent and those living in a designated area, such as Conservation Area, Area of Outstanding Natural Beauty or National Park will usually need to apply for planning permission. 

A loft conversion being carried out in England should not require planning permission providing:

If any of the above guidelines are not met you will need to apply for planning permission through your local Council. Your builder, architect or loft conversion specialist should be able to advise you on whether you will require planning permission and could help you to secure it too.

Wales and Scotland: In Wales and Scotland, there are similar conditions surrounding planning, full details of which can be found on the planning section of the Welsh Government and Services website or at mygov.scot respectively. 

Northern Ireland: Those converting a loft in Northern Ireland should head to the nidirect Government Services website.

You can find out more in our detailed guide to planning permission.

When it comes to loft conversion building regulations there is one rule you need to know – loft conversions always need building regulations approval, irrespective of whether planning permission is required. Your builder, architect or loft conversion specialist will help to prepare building regulations plans, structural specifications and calculations and, ultimately, ensure the project complies with building regulations to ensure you get approval.

New windows need to be big enough to escape from in the event of a fire, meaning that egress window openings will be needed to serve all first floor habitable rooms (not bathrooms). The openings should be at least 450mm x 450mm and at least 0.33m2 in area. The bottom of the opening of rooflights (these should usually be top opening) should be between 800mm and 1,100mm from the floor. If your loft conversion adds a third storey then you will need to ensure that a protected stair enclosure leads down to the exterior exit door. If your staircases rises from a room that is not the hallway, you have a couple of options. Keep the staircase entirely enclosed within a hallway that leads to an external door or. Enclose the staircase in a lobby at the base of the door. The lobby should have two doors offering a choice of front or rear escape. The doors and lobby walls should be fire-resistant. In the case of open plan homes, the staircase may land in an open plan space, meaning a sprinkler system will likely be required. Fire regulations state that the new floor joists in your loft conversion will have to offer a minimum of 30 minutes fire protection — meaning that the ceilings in the rooms below may need to be replastered. Fire safety makes up a large part of loft conversion building regulations and an experienced builder should be well-versed in the regs. The loft room will need to be separated by a fire door located either at the top or bottom of the new staircase. Existing doors on the stair leading to the ground and first floor need to provide 20 minutes of fire resistance and can’t be glazed (unless the glass is fire-rated). Mains powered smoke alarms will be required on each floor of the house, interlinked so that they are all activated when one goes off.

Floors and beams: New floor joists will usually be needed in order to support the weight of the new room. Extra joists will need to be added to comply with building regulations and a structural engineer should be brought in to assess the separation distance required between joists to support anticipated load weight. They should work alongside your chosen builder and specify the size and grade of joist needed. The new joists will run alongside the existing ones, and span between load-bearing walls. Sound proofing: Sound insulation will need to be incorporated. Staircase: As well as the fire regulations that apply to the staircase (see above), there are other regulations relating to staircases that will need to be adhered to. Wall construction: New walls will need to support existing or new roof structures effectively, particularly where existing supports are being removed. Windows: See above for information on fire safety and new windows in your loft conversion. Bathroom: If installing a bathroom, building regulations concerning plumbing and electrics, as well as ventilation will come into play. Electrics: Your new electrics must conform to Part P of the building regulations and the 17th Edition Electrical Regulations. Sometimes it will be necessary to fit a new consumer unit or additional units if the existing unit doesn't have the required capacity. Use a qualified electrician for the job to ensure you can be issued with the necessary certificate on completion — head to the FMB’s find an electrician tool for this. Thermal insulation: Your new space will need to meet insulation requirements as set out in the building regulations and there are two ways of doing this — either cold roof insulation or warm roof insulation. Your building control inspector will specify which one you will require. 

If you live in a semi-detached or terraced house, you will also need to comply with the Party Wall Act 1996. You can find full details in our guide to Party Wall Agreements.

A building control officer will visit to inspect the work at various stages. On the final inspection they will issue you with a completion certificate. 

For a more detailed look at the regulations, see our comprehensive guide to building regulations.

Your builder should provide you with a timescale customised to your specific project. 

Loft conversion costs vary a great deal according to the level of specification you are aiming for, what you plan on using the loft for, where in the country you are, and any hurdles that might crop up along the way – including whether you require planning permission. 

Your final costs will also depend on your own level of involvement, the design route you take, the type of roof you have and even your heating and electricity needs.

It’s better to have a general understanding of the factors that count, than to try and pin down a cost from generic online guides. The reality is that, depending on your bespoke requirements, loft conversions tend to start from £35,000 and can run well into the hundreds of thousands. 

The best advice is to spend some time upfront developing a detailed brief for your builder, including plans if possible. This will ensure a more accurate quote as opposed to a vague estimate that may change. 

Design services. Bathroom sanitaryware and installation. The removal or repositioning of water tanks or chimney stacks. Radiators or underfloor heating. Windows and doors. Plaster finish. Final flooring finish (carpet etc). Lighting. Decoration. Planning fees. Building control fees. Any necessary roof repairs.

Be sure to ask your builder what your final quote will include so that you are both clear on what is expected. Some quotes will go so far as to include final decoration and door and window hardware, while others only cover the basics. Don’t forget to factor in VAT and fees for building regulations and planning permission too.

Finally, having a detailed brief and detailed plans will ensure a more accurate quote from your builder as opposed to a vague estimate that may well change.

For more information on planning permission and regulations for loft conversions, see the LABC’s Front Door website.

Our members are expert professionals who have been professionally vetted and independently inspected on joining to ensure they meet the high standards of the UK’s largest trade association for the construction industry.

Whether you’re investing in a hardwearing quartz worktop or swayed by high-maintenance wood or marble, here’s a few tips on how to look after your new kitchen worktop.

If you’re planning a building project, the combined impacts on the building trade of Brexit, COVID-19 and the war in Ukraine are something you should be aware of.

Are you looking to renovate your home, but worried about prices? Here's how to plan and manage costs for your project.

Apps have become a part of everyday life, home renovation is no different, with many to support with jobs big and small.

These design ideas for under £50K prove you don't have to spend big to make a huge improvement to your home.

Everybody loves a bargain but appointing a builder based purely on a low quote can end up costing you more in the long run.

David Guiterrez of AMIC Ltd talks about the key things every homeowner should know about working with tradespeople.

Dennis Weeks of North London Loft Rooms explores types of loft conversion to help you decide which one is right for you.

There are many different options for extending or adding room to your living space, with a solution to suit all tastes / budgets.

Looking for advice and inspiration for your next building project? Our monthly email gives tips on how to live well and build better, including free tickets to some of the UK's biggest home improvement shows. Find out how we handle your data in our privacy policy. 

Professional builders join us to show their mark of quality to their customers. Let us help you choose the right builder for your project.

© 2022 Copyright Federation of Master Builders

Design & Development by Pixl8

This is the go-to exhibition for all self-builders and renovators at Sandown Park on 25-26 June. See thousands of products, speak to industry experts, be inspired and get tips via the free seminars.